Positiv P-Sit Mesh Back (including armrests) - Black
Reasons to Buy
We wanted to develop a chair that was not only ergonomic, fully adjustable and comfortable - but also affordable and simple to use. The result is this: the P-Sit Mesh Back, an office chair perfectly suited to the more petite user.
So what distinguishes the P-Sit from mass-market alternatives? Instead of standard-cut foam, we’ve fitted our chair with a ‘waterfall’ seat specially cut to comfortably support the curves of the human form without restricting the blood-flow in the backs of the legs. We’ve also added basic adjustments with the option to add more if desired, and ensured the chair back is perfectly curved to support your spine correctly and help prevent sitting-related musculoskeletal disorders.
- Large double-curved waterfall seat
- Double-curved backrest
- Ratchet backrest height adjustment on all mechanisms
- Height & depth adjustable arms
- Seat slide - adds a sliding seat range of 50 mm
- Mesh back
- Black moulded base as standard
- Standard castors for carpeted floors
- Maximum user weight: 150kg (23.6 stone)
- Seat height:
- 460-600 mm
- Seat width:
- 530 mm
- Seat depth:
- 460 mm
- Seat sliding range:
- 50 mm
- Back width:
- 460 mm
- Back height:
- 600 mm
- 5 years on structural parts
- 2 years on moving parts and fabric
- 1 year for 24 hour use
Q: How do I adjust the back angle of my Positiv P-Sit mesh back chair?
On the right hand side of your Positiv P-Sit there is a lever. Lift this to adjust your backrest angle. Once you are comfortable, release the lever to lock the back angle in place.
Q: My gas stem seems a little stiff – is this normal?
Sometimes, over time, the gas stem can become a little stiff when trying to adjust the height. A quick and easy fix for this is using WD-40 or Vaseline. Apply a light layer of grease to the gas stem, then try adjusting the gas stem 3-4 times. The gas stem should now adjust easily.
Q: Can my seat slide forward?
On the left hand side of your Positiv P-Sit you will find the seat slide adjustment. About four fingers width between the front edge of the seat and the hollow of the knee provides good blood circulation.
Q: I have lumbar support in my backrest – how do I adjust this?
On the back of your P-Sit backrest is a lumbar pump. Use the pump to inflate the lumbar support to optimal comfort.
If you need to deflate your lumbar, simply push the valve button on the pump.
Q: How do I stop the rocking motion of my Positiv P-Sit mesh back chair?
There is a tilt lock on the left hand side of your Positiv P-Sit. Push the lever down to lock the tilt motion.
Q: We have hot-desking and I want to adjust the backrest height – how do I do this?
Your Positiv P-Sit backrest works using a Ratchet Back Height Adjustment. Lift the backrest to adjust the back higher. Once it reaches the top, the backrest will fall to the bottom (the lowest setting).
Q: My seat pad is worn from years of use – can I just swap a new one for the old one?
You can swap the pads over. However, you will need to contact our customer services team on +44 (0) 345 345 0010 to arrange this, as this will need to be completed by one of our install technicians.
Still having problems?
Please give our customer services team a call on +44 (0) 345 345 0010.
The estimated lead time for this item is displayed towards the top of the page, under the short description.
Delivery and installation options
We will deliver the item(s) using a standard courier service. You are responsible for the assembly and set up. We will provide assembly and set up videos and instructions to guide you through the process. See our delivery charges ›
Delivery, installation, set up and support
Our delivery partners Product Care will have you comfortably set up and familiarised with your products at the time of delivery. They’ll also take away and recycle the packaging. This option can be selected in the shopping basket page. Find out more about our delivery and installation service ›
Removal and recycling (chairs and desks only)
The recycling service can be added onto the delivery, installation, set up and support option at an additional cost. Choose this option if you would like your old chair or desk taken away when your new one is delivered. This option can be selected in the shopping basket page. Find out more about product removal and recycling ›
We offer a 30 day return policy on this item, providing the item is not damaged and standard options have been ordered. You must first phone the office to obtain a Returns Note and Number. The goods must be returned during business hours, carriage paid, in perfect condition in their original packaging, with the Returns Note enclosed.
For more detailed information on our returns policy and any right you have to return goods under the Consumer Contracts Regulations 2013, please visit our 'Returns and refunds' page, accessed from the footer.
Please note, non-standard options such as a coccyx cut-out or memory foam seat are non-returnable. For more information, contact us on +44 (0) 345 345 0010.
Want your chair within a few days?
We keep a selection of these chairs in stock and waiting to be shipped out to you within a few days. See our popular configurations category for our most popular RH Logic, Positiv and HÅG chair configurations.
Contact us about your seating project
Need more than one chair? However big or small your project is, we have a dedicated service to support you. Not only will you get expert advice, trials, delivery and set-up, but you’ll also benefit from great discounts on bulk orders.
To request a no-obligation quote, or to discuss your requirements further, please fill out our contact form and we will get back to you as soon as possible.