RH Logic 400 High Back Black Office Chair (with armrests, neckrest & hard floor castors)
The RH Logic 400 high back chair enhances breathing and circulation while engaging muscles, thanks to its unique 'two-point principle' of upright posture and active sitting. Its one-to-one tilt action maintains consistent lower back support in any sitting position.
This RH Logic 400 chair comes as standard with a high backrest, lumbar pump, seat slide, 8S armrests, neckrest, silver graphite aluminum base, hard floor castors and black Gaja fabric.
- Available in black
- High back
- 8S Class A Armrests - Black - Black Frame. Adjustable in height and width. Rotating. Armrest height above seat 215-295 mm
- Height and depth adjustable neckrest
- Fully adjustable for seat height, back rake angle, back height, seat slide and lumbar support
- Unique '2PP' principle ensures optimum support and blood circulation during dynamic sitting
- Exchangeable seat and back pads to increase longevity and reduce cost of ownership
- Standard height gas stem (410-530 mm)
- Silver graphite 5X aluminium base
- Castors for hard floors
- Environmental impact is traceable through EPD (Environmental Product Declaration)
- Seat width:
- 465 mm
- Seat depth:
- 475 mm
- Seat height:
- 410-530 mm
- Seat sliding range:
- 60 mm
- Backrest width:
- 445 mm
- Backrest height:
- 620 mm
- Maximum user weight:
- 150 kg (23.5 stone)
- Warranty:
- 10 years, based on 8 hour use
- 5 years when used as a 24/7 chair
Q: How do I adjust the back angle of my RH Logic 400 chair?
There is a row of 3 buttons on the right hand side of your Logic 400. Lift the middle button to adjust the backrest angle. Release the button to lock in place. The angle should be set so that your back makes contact with the backrest.
Q: My gas stem seems a little stiff – is this normal?
Sometimes, over time, the gas stem can become a little stiff when trying to adjust the height. A quick and easy fix for this is using WD-40 or Vaseline. Apply a light layer of grease to the gas stem, then try adjusting the gas stem 3-4 times. The gas stem should now adjust easily.
Q: Can my seat slide forward?
There is a row of 3 buttons on the right hand side of your Logic 400. Lift the button furthest back on the right hand side. About four fingers width between the front edge of the seat and the hollow of the knee provides good blood circulation.
Q: I have lumbar support in my backrest, how do I adjust this?
On the back of the RH Logic backrest is a lumbar pump. Use the pump to inflate the lumbar support to optimal comfort. If you need to deflate your lumbar, simply push the button on the pump.
Q: My RH Logic 400 chair didn’t come with a neckrest – can I order one to add on myself?
You can retro-fit a neckrest to your Logic 400. Simply remove the small plastic tab on top of your backrest and slot the neckrest in.
Q: How do I stop the rocking motion of my RH Logic 400 chair?
There is a tilt lock on the right hand side of your Logic 400 at the back. Turn the handle clockwise to lock the chair. To unlock, simply turn the handle anticlockwise.
If you want to adjust the tension of the tilt motion, use the front handle under the right hand side of your seat. Turn anticlockwise for firmer tension and clockwise to loosen the tension.
Q: We have hot-desking and I want to adjust the backrest height – how do I do this?
On the bottom right of your backrest there is a grey handle. Simply pull the handle upwards to adjust the height of your backrest. Once you are happy with the position, push the handle downwards.
Q: My seat has become worn over time – can I just swap a new one for the old one?
Yes, swapping the seat pad is simple. Once you receive your new seat pad, pull off the old worn seat pad. You will notice there are holes underneath around the edge of the seat pad. Simply align these to the seat shell, then push down on the edges to secure the seat pad into place.
Still having problems?
Please give our customer services team a call on +44 (0) 345 345 0010.